JINGKE Atv Autobest Fuel Pump for GY6 50CC 125CC 150cc ATV Go Kart Scooter Moped 4 Wheeler Quad Bikes Dune Buggy

May 14, 2019 - Comment
Add to Cart $11.59Amazon.com Price
(as of June 14, 2019 18:12 GMT+0100 - Details)

Description:

A top quality oil pump separator. This oil pump separator may not be the cheapest around, but it is well made, high flow and will handle fluids that would destroy the internals of some other pumps separator.

Suitable for virtually all fluids, this will handle kerosene, oils, water etc.

Fuel Pump New Fuel Pump PETCOCK SCOOTER MOPED GO KART GY6 50CC 150cc 250CC TANK PET COCK

 

Specification:

Size: 91mm x 55mm x 33mm/3.58inch x 2.17inch x 1.30inch(L*W*T)

Hole Distance: 75mm/2.95inch

Hole Diameter: 6.4mm/0.25inch

Color: Silver Gray

1 x Fuel Pump

Features & details

New Fuel Pump Valve Petcock GY6 50CC 150cc 250CC Moped Scooter GO Kart 152QMI 157QMJ Engine Tank PET Cock

A top quality oil pump separator. This oil pump separator may not be the cheapest around, but it is well made, high flow and will handle fluids that would destroy the internals of some other pumps separator.

Suitable for virtually all fluids, this will handle kerosene, oils, water etc.

Size: 91mm x 55mm x 33mm/3.58inch x 2.17inch x 1.30inch(L*W*T)

Hole Distance: 75mm/2.95inch,Hole Diameter: 6.4mm/0.25inch,1 x Fuel Pump.

Product information GY6 50CC 150cc 250CC

Product Features

  • Cast Aluminum Case Prevents Rusting While Reducing Weight
  • Fuel Pump: Hole Distance: 7.5cm/2.95inch,Hole Diameter: 0.64cm/0.25inch, please check the size before you buy it.
  • HIFROM focus on provide high quality products at fair price: Professional Factory; 3 Months warranty; if you unsatisfy with our product, you can return to our USA warehouse, no risk.
  • High quality Fuel Pump for GY6 150-250cc Scooters, ATVs, Go Karts
  • Package included: 1 x Fuel Pump

Comments

Anonymous says:

Nice replacement pump. Replaced pump on 1980 Evinrude 35. Fit perfectly with no leaks.

Anonymous says:

This is the one to buy! Have been messing with many of these vacuum type fuel pumps and by far this one is the absolute best. Others that I have had, it took 20 minutes of cranking and starting fluid to get the fuel pumped to the carb but this one did it in 3- seconds with no spray. I normally do not write reviews but this one I had to. Thanks Supplier.

Anonymous says:

Great product. I’m rumming better that new now! My 150cc never ran right since new. Valve adjustments, plugs, carb adjustments didn’t help.This is twice the size of my original one and is metal vs plastic. I could only use one of the two original mouting holes when installing. But one hole would work fine or you can simply drill a new hole like I did.This works great, but the OEM one was very cheaply made and if you have one searously consider replacing it.

Write a comment

*