Spurtar TPMS Car Tire Pressure Monitoring System Solar Power Universal Wireless LCD Display with 4 External Sensors Real-time Display
1. Recommended that charge the host for 3-5 hours before first use.
2. Turn on the receiver host first (long press the left button for three seconds to power on or power off), then install the 4 sensors.
Sensor working voltage: 2 – 3.6V
Display working voltage: 3.5 – 5V
Optional pressure units: Psi / Bar
Optional temperature units: Deg.C, Deg.F
Operating frequency: 433.92MHz + / – 20KHz
Sensor working temperature: – 40℃ ~ +90℃
Monitoring temperature scope: -20℃ ~ +80℃
Monitoring pressure scope: 0 – 3 Bar
Sensor battery supply: CR1632 battery (work for about 2 years)
1 x TPMS Receiver host
4 x Sensors
4 x Anti-lost nuts
1 x Hex spanner
1 x Anti-slip Pad
1 x User manual
- 【ENVIRONMENTAL】Solar powered charging and charging trough the usb port ensures tire pressure monitoring system ( TPMS ) will work continuously and won’t occupy the car cigarette lighter socket.
- 【SPURTAR】Must-have tool for drivers who drive an old car. Spurtar wireless TPMS displays four tire pressure & temperature data in real-time. Easily place, read data for your journey.
- 【6 ALARM MODES】High pressure alarm, low pressure alarm, rapid tire leak alarm, high temperature alarm, no signal alarm, sensor battery low power alarm (Press any button will stop alarming).
- 【WIDELY USED】The TPMS is suitable for tire pressure range less than 3.0 Bar, like sedans, SUV, MPV and so on. Pressure accuracy: 0.1bar.
- 【EASY TO USE】Easily install 4 sensors in minutes with a small spanner(INCLUDED). The pressure and temperature data can be switched (normal 2.0- 2.8 Bar / 29- 40.6 Psi), with pressure unit: Psi/Bar and temperature unit: C/F (optional).